Put Chemicals in a Hot Tub
There are different chemicals you can add to your hot tub. These include pH increaser, pH decreaser, calcium hardness, and metal removal. They all need to be added to your hot tub chemicals in a certain order, so that you get the best results. The goal is to achieve a pH balance between 7.4 and 7.6 and an alkalinity level of 100 to 200 parts per million.
Chlorine is the most common sanitiser. This is because it sanitises the water by creating a hostile environment for bacteria and other microorganisms. Chlorine also produces chloramine, which helps keep the water clear. Chlorine attracts and enlarges microscopic particles, so it is important to use a filter to catch these particles.
Our customer service is outstanding as you can see from this Google review by Jay Marshall: “Purchased a hot tub from Elite Spas in Ipplepen. Ian is absolutely fantastic and has great knowledge on all products and services available. We had a really quickdelivery, and we were up and running in no time.”
Another way to increase the sanitization of your water is to add bromine tablets. These tablets dissolve slowly and will sanitize your water. Chlorine tablets are also a good option, as they will sanitize the water for a few days. But you should always check your water balance before adding any chemicals.
How to Put Chemicals in a Hot Tub
It is also important to drain your hot tub after every use. The water in a hot tub can be filled with bacteria, which are harmful to your health. To keep your hot tub water safe and free of bacteria, you need to add the right chemicals in the right order. This includes rinsing the water thoroughly with a soft cloth and using a non-abrasive cleaner.
Before adding any chemicals to your hot tub, you need to check the pH levels of the water. These levels are different based on the brand and size of your hot tub. Make sure to consult the owner’s manual to get the best recommendations for your hot tub. You will need to measure the chemicals carefully and add them one at a time.
Another chemical you can add is bromine. It is similar to chlorine but will not dissolve as quickly. It is important to test your water regularly as bromine will build up over time. It should be able to show a Bromine level of two to six parts per million when you test it.
Once you have finished adding the chemicals, wait at least 30 minutes before using your hot tub. This will allow the chemicals to dissolve before you use the hot tub. Depending on your hot tub’s water temperature, you may need to add more than once each day. However, you should never leave the water in the tub for more than 12 hours.
If you find that your hot tub water is too cloudy, it is possible that the pH balance is off. Adding a chemical will help correct the pH balance in your hot tub. It is best to test your water before adding any chemicals to the water. If you find that the pH level is above 7.8 parts per million, it is too acidic or alkaline. Either of these factors can result in cloudy water.